Novelty 2017 varicore V10 lithium Smart Battery Charger 1.2 3.7 3.2 3.85 AA / AAA 18350 26650 10440 18650 14500 16340 25 | Электроника

Novelty 2017 varicore V10 lithium Smart Battery Charger 1.2 3.7 3.2 3.85 AA / AAA 18350 26650 10440 18650 14500 16340 25 | Электроника

Product Description V10 Description: First, the requirements and functions of the charger: 1. Use a USB 5 V DC input, a charging slot and an independent control system 2. There are two types of charging the current selection (500ma / 1000ma) 3. The LED indicates the charge status of 25% 50% 75% 100% and the type of battery nimh 1.2 li-fe 3.0 in Li-ion 3.7 Li-Ion 3.85 V. 4. It can automatically recognize the lithium battery (li-ion) and nickel-metal hydride (ni-mh) batteries, manual phosphate treatment (liepo4) batteries and Li-ion battery 3.85 5. there is 0 voltage activation 1.6-2.2 does not charge (but donations will be activated flow of currents). 6. There is overload and discharge, short circuit protection, intelligent recognition of bad battery and reverse battery protection. (Note: short channel, poor contact battery, the charger does not work, the LED does not light) 7. charging mode, DC 8. Using the DC-charger to 5v-1a (Micro-Connector) 9. Item: 5 V standard / 1000ma USB output for automatic identification, Item b: usb output function Secondly, the keys and description functions 1. press: under, at any time, hold the SELECT button for 2 seconds, each mA 1000ma converter charge current; Power to charge the battery, press the select button to change the type of battery, the battery should be charged at the selected type (for example 3 3.85 V) for 5 seconds to enter the charge state. 2. LED: The charger is connected to a 5V power source, the charger has all led to full brightness instantly, without charging the battery slot, 500ma (LED) indicator, the other lights go out. If you find the battery, four LED flash, then you can press but Tone to select the type of battery, if you do not select five seconds after entering the default charge recognition, the charge indicator, According to the relevant flash facts. Click to request a charge pattern (without the charge indicator) five seconds after returning to the charge state. When he did not do this, insert the battery charge you can see the ratio (about 5 seconds and then exit, you want to view, click again) Usb output Display: When USB output, Power indicator light turns off after 10 seconds, browse button. Third, the technical parameters: 1 input power: Micro USB DC 5 V / 1A 2 Output voltage: 4.2 V ± 1% / 5 3, output current: 500mA / 1000mA 4, constant Voltage charging, Turn off the current: <100 m; 5, external power supply in standby mode: <15.0mA; Four, USB Output function: 1, USB port output load voltage: 4.90-5.30 V; 2, output current: 1000mA 3, without load current: <1mA; April 1000 m load of the current port Output voltage: 4.75-5.25 V; 5 Output voltage: 3.0 ± 0.1 V; B. Battery compatibility: Li-ion / wide: 18650, 18490, 18350, 17670, 17500, 16340 (RCR123), 14500, 10440 Charging dimensions of the device: 113 mm × 38 mm × 32 mm (length / width / height) Weight ** * g (without battery power cord)